What to do when the car water tank leaks
If it is the car in the process of driving, because of the vibration of the car or vehicle accident, so that the water tank water pipe breaks water, according to the specific situation to take measures:
1, water leakage does not exceed 1mm cracks or 2mm holes, add a bottle of water tank strong plugging agent to the tank, start the car to run.
2, open the cooling water began to circulate for 5 to 10 minutes, whether the cooling system in the water tank or rubber pipe and everywhere, there is water leakage will stop leaking, do not need to be released after leakage, will not affect the heat dissipation and blockage. There is a military water tank trailer for sale.
3, if no leakage agent is carried, the individual heat pipe slight water leakage, can temporarily use loose tobacco into the water tank, the use of water circulation pressure, so that tobacco blocked in the heat pipe leakage, temporary use.
4. If the water tank heat pipe leakage is serious, the heat pipe leakage can be cut off from the water leakage, the cut heat pipe can be blocked with soapy cotton ball, and then the cut heat pipe head can be flattened with pliers and then the edge can be tightened to stop the water leakage.
5. If the rubber pipe joint leaks, you can wrap the rubber pipe joint clip in the rubber pipe joint two times with a screwdriver in time, and then tighten it with pliers. If the rubber tube is damaged, the broken place can be wrapped tightly with adhesive cloth for temporary use.
Six, can car water tanks use dismantling parts?
A car water tank can use disassembly parts. a water tank is the most vital vehicle, is nearly the only heat dissipation device. If the water tank effect is poor, damage should be immediately maintenance, replacement, you can use disassembly parts. But in the selection of tank demolition parts, we must consider whether the tank type is appropriate, the degree of corrosion of the tank, the degree of aging and so on.
Seven, car water tank daily maintenance
Broadly speaking, driving 20,000 kilometers or a year should be replaced with antifreeze; never add tap water when there is no antifreeze. Engine water tank rust, scaling is the most common problem. Rust and scale will limit the flow of antifreeze in the cooling system, reduce the heat dissipation effect, lead to engine overheating, and even cause engine damage. Antifreeze liquid oxygenation will also form acid, corrosion tank metal parts, resulting in tank damage, leakage. The solution to the failure of the water tank is mainly in daily routine inspection. We should frequently see whether the water tank leakage or corrosion phenomenon, to clean on time, replace or add antifreeze, in order to improve the boiling point, prolong the service life. Broadly speaking, driving 20,000 kilometers or a year should be replaced with antifreeze. This can improve the boiling point, prevent the production of scale, rust and enhance the heat dissipation effect, so that the pump lubrication, to avoid and eliminate the bubble caused by instant elevated temperature engine damage. When antifreeze shortage also try not to add water to supplement, especially in the summer. Because the chlorine contained in tap water will produce corrosion, corrosion and blockage on the water tank, engine and additional systems, so that the cooling system is not smooth, resulting in excessive engine temperature resulting in vehicle damage.
Special reminder: there is a misunderstanding about the tank, that is, the larger the radiator outside the tank, the better the heat dissipation effect. This is a wrong perception. The design of the radiator fin of the water tank can meet the needs of the vehicle as long as it is matched with the water tank, the power of the vehicle, the front engine compartment and the appearance covering parts.