colored jewelry wire wholesale How to maintain silver jewelry?

wholesale cheap jewelry by the dozen 1. The best maintenance method of silver jewelry is to wear every day, because human oil can make a natural and warm luster.
2. Do not wear other precious metal jewelry at the same time when wearing silver jewelry to avoid collision deformation or abrasion.
3. Keep the silver jewelry dry. Don't wear swimming. Do not approach hot springs and seawater. When not in use, you can use cotton cloth or noodle paper to gently wipe the surface, remove water and dirt, and place it in a sealed bag or box to avoid contact with air.
4. If the silver jewelry is found to have a sign of yellowing, the easiest way to use a toothpaste and a little water to light the surface. Or clean the fine seam of the silver jewelry with a jewelry brush, and then use the silver cloth to gently wipe the surface, and you can immediately decorate the original beauty. (If you use silver cloth to restore about 89 % of silver white conditions, do not use silver milk and silver laundry, because they are all corrosive. After using these products, silver jewelry will become more It is easy to turn yellow. In addition, the silver cloth contains silver maintenance ingredients and cannot be washed with water)
5. The silver jewelry is severely yellow, and the time for soaking in silver water should not be soaked for too long. Generally, it is not long. Clean and dry it with a tube paper.
6. If you can use the silver cloth to recover about 80 % of the silver white conditions, you do not need to use silver milk and silver water washing water, because these products are corroded. The easier it is to turn yellow. Silver cloth contains silver maintenance ingredients and cannot be washed.
7. If the silver jewelry is not handled and collected after wearing it, it is very likely that the silver jewelry is darkened. At this time, the fine slit of the jewelry brush should be used, and then the silver milk droplets should be used on the noodle paper. The black oxides on the silver surface are wiped off, and the original light of the silver cloth recovers the original light. After that, you must remember to do a good job of daily maintenance, avoid the silver jewelry from turning black again, and the silver jewelry is difficult to wipe white after many times.
The above is some basic precautions. Let's introduce the maintenance methods of electroplating and unwaper silver.
Bukin is easy to oxidize is the flaws of its Yu, and it is also a headache for consumers and producers. At present, the common silver surface treatment methods in the domestic market include further oxidation, electroplating, and unprocessed.
Hasmid oxidation and unbound are the characteristics of the use of silver oxidation and black, using oxidant to deepen the oxidation of the silver surface, or use the natural oxidation of the silver surface, to produce richer color and mechanism effects in the silver jewelry, so as to make the flaws flaw Transforming into Yu is the method of trying to strive.
The method of truly preventing the surface of silver jewelry is electroplating. At present, there are various types of silver -plated, plating, and plating.
In first, whether there are electroplating (silver jewelry is generally divided into electroplating and no plating):
The silver jewelry with electroplating, that is, the inner layer is sterling silver, the surface is doing current processing; plating is generally plated; It is also divided into electric gold and platinum; the method of identifying electroplating is the luster presented by the surface of the plating. Electro -plated silver jewelry is easy to lose luster due to vulcanization (sulfur dioxide in the air and a chemical reactions in the air form a layer of silver sulfide on the silver jewelry and the apple after cutting will slowly turn black).
The method of simply handling electroplated silver jewelry is as follows:
1. Purchase a pack of alum at the nearby Chinese pharmacy or pharmacy; 10 :: Boil the ratio of alum 1 with water (must be boiled);
3. Take out the silver jewelry and put it in cold water (such as: toothbrush) dipping with toothpaste or laundry milk or coloring;
4. Blow dry with a hair dryer, and then wipe with suede to be as beautiful as new.
The types of electroplating jewelry that can be processed above are:
a. Necklace (can be crisp)
b. n d. Bracelets, bracelets (thickness can be)
e. Silver jewelry has plastic inlaid
simple handling silver jewelry method as follows:
(Note: The following method Restricted silver jewelry: A. Silver jewelry has plastic and the like; )
1. Baked silver jewelry with a fire (the lighter can be) to destroy the tissue structure of its surface, and the baking time depends on the coarse and detail of the silver jewelry. Put it in the alum water and cook it. After boiling, remove the silver jewelry, put it in cold water with a soft brush (such as toothbrush) dipping with toothpaste or laundry milk or coloring; , Finally, wipe the silver cloth or wipe the silver powder to present the pure silver nature;
The silver jewelry without electroplated silver jewelry processing method must be paid to the following points:
1, thin necklaces or thin fines or thin thin necklaces or thin thin necklaces or thin thin necklaces or thin fines When the silver jewelry "overfire", the same position cannot stay for too long;
2. After the silver jewelry has a "overfire" inlaid with gemstones, it cannot be directly immersed in cold water, and it must be cooled naturally, otherwise the gem is easy to break; r; r; r; r; n3. The fine silver jewelry can be brushed when cleaning, and the effect is better (only fine silver jewelry can be brushed to clear the first);
. When normal maintenance, you can wipe the silver cloth or wipe the silver powder. But, if your jewelry can no longer be wiped with silver cloth or silver powder, you can use the above methods (the situation where you cannot use silver cloth or silver powder is that you have not maintained it for too long!) Do not use silver laundering Water or silver cream, it is just a way to use chemical potions to temporarily make your jewelry. The potion is harmful to the human body, and the effect is worse than one at a time.
It also a tips for making the silver jewelry bright. Here is a reference for everyone: if you want to make the newly bought silver jewelry more brighter and avoid its darkening, you can apply a thin layer on its surface. The transparent nail polish, then apply it again every ten days. If you want to remove nail polish, you can soak it with banana water, and then wash it with water.

wholesale luxury diamond jewelry Don't dip the water, there is a little friction,

high quality jewelry wholesale